Version: v0.7.x

Quick Start

This guide illustrates how to patch outdated containers with copa.

Prerequisites

Linux or macOS configured through the setup instructions. This includes:
- copa tool built & pathed.
- buildkit daemon installed & pathed. Examples
  - The docker daemon runs a buildkit service in-process. If you are using this for your buildkit instance, Docker must have the containerd image store feature enabled.
  - If you are using a buildx instance, or using buildkitd directly, there is no need to enable the containerd image store. However, only images in a remote registry can be patched using these methods.
- docker daemon running and CLI installed & pathed.
- Optional:
  - trivy CLI installed & pathed.
    - Alternatively, see scanner plugins for custom scanner support.

Sample Steps

Before patching your image, specify a buildkit instance to connect to:

By default copa will attempt to auto-connect to an instance in order:
1. Default docker buildkit endpoint (requires at least docker v24.0 with containerd image store support enabled)
2. Currently selected buildx builder (see: docker buildx --help)
3. buildkit daemon at the default address /run/buildkit/buildkitd.sock
If an instance doesn't exist or that instance doesn't support all the features copa needs the next will be attempted. Please see custom buildkit addresses for more information.

Scan the container image to check for patchable OS vulnerabilities:

$ export IMAGE=docker.io/library/nginx:1.21.6
$ trivy image --vuln-type os --ignore-unfixed $IMAGE
nginx:1.21.6 (debian 11.3)
==========================
Total: 207 (UNKNOWN: 0, LOW: 12, MEDIUM: 104, HIGH: 76, CRITICAL: 15)
...

Patch the supplied image with Copa:
1. Update all outdated packages By default, Copa will update all outdated packages in an image to the latest available versions.
  
  note
  Upgrading all packages may introduce compatibility issues or break existing functionality. Make sure to test the patched image to ensure stability.
```
copa patch -i $IMAGE
```
  tip
  If you want to patch an image using the digest, run the following command instead:
  export IMAGE=docker.io/library/nginx:1.21.6@sha256:25dedae0aceb6b4fe5837a0acbacc6580453717f126a095aa05a3c6fcea14dd4 copa patch -i $IMAGE
2. Update only targeted packages Alternatively, you can chose to have a targeted patching of your image by providing an optional vulnerability report. In the following commands, we are only updating packages marked vulnerable by Trivy:
  
  2.1. Scan the container image for patchable OS vulnerabilities, outputting the results to a JSON file:
```
trivy image --vuln-type os --ignore-unfixed -f json -o $(basename $IMAGE).json $IMAGE
```
  2.2. Supply the Trivy report as an additional argument to the Copa command to patch image.
```
copa patch -r $(basename $IMAGE).json -i $IMAGE
```
In both cases by default, Copa will produce a tag with a -patched suffix and export a new image with the specified 1.21.6-patched label to the local Docker daemon.

note
If you're running this sample against an image from a private registry instead,ensure that the credentials are configured in the default Docker config.json before running copa patch, for example, via docker login -u <user> -p <password> <registry>.

note
If you're patching an image that is local-only (i.e. built or tagged locally but not pushed to a registry), copa is limited to using docker's built-in buildkit service, and must use the containerd image store feature. This is because only docker's built-in buildkit service has access to the docker image store (see Prerequisites for more information.)

Scan the patched image again and verify that the vulnerabilities have been patched:

$ trivy image --vuln-type os --ignore-unfixed $IMAGE-patched
nginx:1.21.6-patched (debian 11.10)
===================================
Total: 0 (UNKNOWN: 0, LOW: 0, MEDIUM: 0, HIGH: 0, CRITICAL: 0)

Run the container to verify that the image has no regressions:

$ docker run -it --rm --name test $IMAGE-patched
/docker-entrypoint.sh: /docker-entrypoint.d/ is not empty, will attempt to perform configuration
/docker-entrypoint.sh: Looking for shell scripts in /docker-entrypoint.d/
/docker-entrypoint.sh: Launching /docker-entrypoint.d/10-listen-on-ipv6-by-default.sh
10-listen-on-ipv6-by-default.sh: info: Getting the checksum of /etc/nginx/conf.d/default.conf
10-listen-on-ipv6-by-default.sh: info: Enabled listen on IPv6 in /etc/nginx/conf.d/default.conf
/docker-entrypoint.sh: Launching /docker-entrypoint.d/20-envsubst-on-templates.sh
/docker-entrypoint.sh: Launching /docker-entrypoint.d/30-tune-worker-processes.sh
/docker-entrypoint.sh: Configuration complete; ready for start up
2024/01/22 23:32:54 [notice] 1#1: using the "epoll" event method
2024/01/22 23:32:54 [notice] 1#1: nginx/1.21.6
2024/01/22 23:32:54 [notice] 1#1: built by gcc 10.2.1 20210110 (Debian 10.2.1-6)
2024/01/22 23:32:54 [notice] 1#1: OS: Linux 6.2.0-1018-azure
2024/01/22 23:32:54 [notice] 1#1: getrlimit(RLIMIT_NOFILE): 1048576:1048576
2024/01/22 23:32:54 [notice] 1#1: start worker processes

You can stop the container by opening a new shell instance and running: docker stop test

You can inspect the structure of the patched image with docker history to see the new patch layer appended to the image:

$ docker history $IMAGE-patched
IMAGE          CREATED              CREATED BY                                      SIZE      COMMENT
262dacfeb193   About a minute ago   mount / from exec sh -c apt-get install --no-ins…   41.1MB    buildkit.exporter.image.v0
<missing>      20 months ago        /bin/sh -c #(nop)  CMD ["nginx" "-g" "daemon…   0B
<missing>      20 months ago        /bin/sh -c #(nop)  STOPSIGNAL SIGQUIT           0B
<missing>      20 months ago        /bin/sh -c #(nop)  EXPOSE 80                    0B
<missing>      20 months ago        /bin/sh -c #(nop)  ENTRYPOINT ["/docker-entr…   0B
<missing>      20 months ago        /bin/sh -c #(nop) COPY file:09a214a3e07c919a…   16.4kB
<missing>      20 months ago        /bin/sh -c #(nop) COPY file:0fd5fca330dcd6a7…   12.3kB
<missing>      20 months ago        /bin/sh -c #(nop) COPY file:0b866ff3fc1ef5b0…   12.3kB
<missing>      20 months ago        /bin/sh -c #(nop) COPY file:65504f71f5855ca0…   8.19kB
<missing>      20 months ago        /bin/sh -c set -x     && addgroup --system -…   64.5MB
<missing>      20 months ago        /bin/sh -c #(nop)  ENV PKG_RELEASE=1~bullseye   0B
<missing>      20 months ago        /bin/sh -c #(nop)  ENV NJS_VERSION=0.7.3        0B
<missing>      20 months ago        /bin/sh -c #(nop)  ENV NGINX_VERSION=1.21.6     0B
<missing>      20 months ago        /bin/sh -c #(nop)  LABEL maintainer=NGINX Do…   0B
<missing>      20 months ago        /bin/sh -c #(nop)  CMD ["bash"]                 0B
<missing>      20 months ago        /bin/sh -c #(nop) ADD file:134f25aec8adf83cb…   91.8MB

Prerequisites​

Sample Steps​

Prerequisites

Sample Steps